Cycletrol C2000 Series DC drive provides rapid cycling up to 30 cpm. The C2000 serves as an accurate speed and cycling control and is covered by our two-year warranty.

Cycletrol® C2000 Series

The Cycletrol C2000 Series DC drive provides rapid cycling up to 30 cpm. It provides rapid cycling capabilities, while offering higher reliability and lower maintenance compared to clutch/brake mechanisms. The C2000 serves as an accurate speed and cycling control and is covered by our two-year warranty.

Economical alternative for lighter duty cycling applications
Digital logic inputs are optically isolated
Versatile logic allows direct interfacing with switches and push-buttons or solid state devices
LED function lights are easy-to-see indicators of control status
Transient protection by voltage clamping MOV's and RC networks protect power components against power spikes
Wide speed range with full torque available down to 60 rpm
Torque limiting by the Cycletrol's adjustable current limit provides motor and drive train protection in the event of machine overloads or jams
Heavy-duty aluminum chassis or NEMA 12 enclosures

SELECTION
Horsepower Range	1/8 - 1 (120VAC) 1/8 - 1 (240VAC)
Line Voltage	120 or 240; 50/60 Hz; single phase
Maximum Duty Cycle	30 cycles/minute continuous with typical 1 HP motor. Total reflected inertia not to exceed 20% of amature inertia.
Output: Armature Voltage (VDC)	0-90 (120VAC) 0-180 (240VAC)
Configurations	Chassis, NEMA 12
Speed Range: Armature Feedback Tachometer Feedback	30:1 full torque NA
Speed Regulation: Armature Feedback Tachometer Feedback	<5% of base speed (for 95% lad change
Speed Variation Due to Line Voltage Fluctuation Due to Thermal Drift	<1% armature voltage change within input power range <2% for control; motor depends on application
Ambient Temperature	32-131fF; 0-55fC (chassis) 32-104fF; 0-40fC (NEMA 12
Control Adjustments Minimum Speed Maximum Speed Acceleration Current limit	Fixed at zero 50 to 115% of motor base speed Fixed at 0.2 seconds 10-150% control rating
Inputs: Logic Input Analog Speed Inputs	Start, Stop, Jog, Reset, Override Stop 5K ohm, 1 watt, potentiometer supplied with each control. Isolated process signal of 0-10 VDC may be used.
LED indicators	Power
Accessories: Bi-Directional MOC-1 Motor Overload Control	Optional Optional

SELECTION
Description	Cycletrol C2000	MOC-1 Motor Overload Control	Bi-directional Option
Chassis Versions 120V 1ÿ Up to 1/2 HP Up to 1 HP Up to 3 HP Up to 5 HP	176B3001 176B3003 ó ó	400100 400100 400100 ó	500100 500100 500100 500101
240V 1ÿ Up to 1/2 HP Up to 1 HP Up to 3 HP Up to 5 HP	176B3005 176B3007 ó ó	400200 400200 400200 ó	500200 500200 500200 500201
NEMA 12 Versions 120V 1ÿ Up to 1/2 HP Up to 1 HP Up to 3 HP Up to 5 HP	1763002 1763004 ó ó	400130 400130 400130 ó	500130 500130 500130 500101
240V 1ÿ Up to 1/2 HP Up to 1 HP Up to 3 HP Up to 5 HP	176B3006 176B3008 ó ó ó	400230 400230 400230 400230 ó	500230 500230 500230 500230 500201

Cycletrol® C2000 Dimensions

Cycletrol® C2000 Wiring Schematic

Home | Overview | Capabilities | Contact Us | Site Map

Hampton Controls, Inc.
Wendel Road • P.O. Box 187
Wendel, PA 15691
Phone: (724) 861-0150 • Fax: (724) 861-0160
sales@hamptoncontrols.com • www.hamptoncontrols.com

Copyright © Hampton Controls, 2005. All Rights Reserved.