MOC-1 Motor Overload Control

The MOC-1 monitors motor load and provides a latched "alarm" contact if an overload occurs. An adjustable time delay allows the MOC-1 to ignore normal acceleration currents without nuisance tripping. The MOC-1 is frequently used to shut down an overloaded system before motor or machine damage can occur.

Features

• Monitors 1/8-3 HP DC motors
• 120 or 240 VAC control power
• Three DPDT alarm (over load)
  contacts rated for 120/240 VAC;
  3 amps
• 25 turn adjustments for trip point and ignore time
• LED function lights (Power ON, Start, Overload)
• Start and Reset Inputs
• Chassis and NEMA 12 Enclosure

Dimensions

Wiring Schematic